Split Face Accident 2009
Split Face Accident 2009: A Beginner's Guide to This Iconic Special Effects Makeup Look
This guide will walk you through creating the "Split Face Accident 2009" special effects makeup look, inspired by various interpretations of gruesome facial injuries. While the name references a specific year, the underlying techniques are timeless and adaptable. This tutorial is designed for beginners, so we'll focus on creating a realistic and impactful effect without requiring advanced skills.
Prerequisites:
- Age Appropriateness and Sensitivity: This look is inherently graphic and may be disturbing to some. Ensure you are creating it responsibly and consider your audience. It's not suitable for children and should be used with discretion.
- Patience: Special effects makeup takes time. Don't rush the process. Allow adequate drying time between layers for the best results.
- Cleanliness: Always work in a clean environment with clean tools to prevent infection.
- Barrier Cream: A non-comedogenic moisturizer to protect your skin from makeup.
- Liquid Latex: Essential for building the prosthetic. Make sure you're not allergic to latex before using it. Perform a patch test on your arm 24 hours in advance.
- Cotton Balls/Tissue: For building volume and texture under the latex.
- Spirit Gum (or Pros-Aide): An adhesive to attach the prosthetic to your skin.
- Spirit Gum Remover (or Pros-Aide Remover): For safe and easy removal.
- Setting Powder (Translucent or Flesh-Toned): To set the latex and prevent stickiness.
- Foundation (Matching Your Skin Tone): To blend the prosthetic seamlessly.
- Concealer (Slightly Lighter Than Your Skin Tone): To highlight areas around the wound.
- Red Cream Makeup: For simulating fresh blood and raw tissue.
- Dark Red/Brown Cream Makeup: For simulating older, dried blood and bruising.
- Black Cream Makeup (Optional): For adding depth and shading to the wound.
- Fake Blood (Stage Blood): For a realistic finishing touch.
- Makeup Sponges (Various Sizes): For applying foundation, concealer, and cream makeup.
- Makeup Brushes (Various Sizes): For detailed work and blending.
- Sculpting Tool (Optional): A spatula or similar tool can be helpful for shaping the latex.
- Hair Dryer (Optional): To speed up the drying process of the latex.
- Mirror: For accurate placement and application.
- Latex Allergy: If you experience any itching, redness, or swelling after applying liquid latex, remove it immediately and discontinue use.
- Latex Not Drying: Ensure you are applying thin layers of latex and allowing sufficient drying time between layers. A hairdryer on a low setting can help speed up the process.
- Prosthetic Not Sticking: Make sure both the prosthetic and your skin are clean and dry before applying spirit gum (or Pros-Aide). Allow both surfaces to become tacky before pressing them together.
- Makeup Not Blending: Use a damp makeup sponge and blend in small, circular motions. Take your time and be patient.
- Blood Looking Fake: Use high-quality stage blood and apply it sparingly and realistically. Experiment with different shades of red and brown to create a more natural look.
- Soak a cotton pad with spirit gum remover (or Pros-Aide remover) and gently press it onto the edges of the prosthetic.
- Slowly and carefully peel away the prosthetic, using the remover to dissolve the adhesive.
- Cleanse your face thoroughly with soap and water to remove any remaining makeup or adhesive.
- Apply a moisturizer to soothe your skin.
Tools and Materials:
Step-by-Step Instructions:
1. Preparation:
* Cleanse your face thoroughly and apply a thin layer of barrier cream to protect your skin.
* Decide where you want the "split" to be. A good starting point is along the cheekbone, forehead, or jawline.
* Gather all your materials and lay them out for easy access.
2. Building the Prosthetic (The "Split"):
* Apply a thin layer of liquid latex to the area where you want the split to be. Allow it to dry completely. You can use a hairdryer on a low setting to speed up the process.
* Tear off small pieces of cotton ball or tissue and press them onto the latex while it's still slightly tacky. This will create the raised texture of the wound. Focus on building up the center of the "split" to create a deeper, more dramatic effect.
* Apply another layer of liquid latex over the cotton/tissue, encapsulating it completely. Smooth out any rough edges.
* Repeat steps 2 and 3, adding more layers of cotton/tissue and latex, until you achieve the desired height and shape for the "split." Typically, 3-4 layers are sufficient. Remember to allow each layer to dry completely before applying the next.
* Once the final layer of latex is dry, dust it liberally with setting powder. This will remove the stickiness and make it easier to work with.
3. Attaching the Prosthetic:
* Carefully apply a thin layer of spirit gum (or Pros-Aide) to the back of the prosthetic and the corresponding area on your face.
* Allow both surfaces to become tacky (a few seconds).
* Gently press the prosthetic onto your face, aligning it carefully. Hold it in place for a few minutes to ensure a secure bond.
4. Blending and Smoothing:
* Apply a thin layer of liquid latex around the edges of the prosthetic to blend it seamlessly with your skin. Allow it to dry and set with powder.
* Using a makeup sponge, apply foundation that matches your skin tone to the entire area, including the prosthetic. Blend carefully to eliminate any visible lines or edges.
* Use concealer (slightly lighter than your skin tone) to highlight areas around the wound, creating depth and dimension. Focus on the areas directly adjacent to the "split."
5. Creating the Wound:
* Using a small brush, apply red cream makeup to the inside of the "split." This will simulate raw, exposed tissue.
* Apply dark red/brown cream makeup around the edges of the "split" to simulate dried blood and bruising. Blend the colors slightly to create a more realistic effect.
* (Optional) Use a small amount of black cream makeup to add depth and shading to the wound. Apply it sparingly in the deepest recesses of the "split."
6. Adding Blood:
* Apply fake blood (stage blood) to the inside of the "split," allowing it to drip and pool slightly.
* You can also splatter a small amount of fake blood around the wound for a more dramatic effect.
* Remember to use fake blood sparingly and realistically. Too much blood can detract from the overall effect.
7. Finishing Touches:
* Examine your work in the mirror and make any necessary adjustments.
* Use a small brush to clean up any stray makeup or blood.
* Consider adding other details, such as small pieces of torn skin (created with latex and tissue) around the wound, to enhance the realism.
Troubleshooting Tips:
Removal:
Summary:
The "Split Face Accident 2009" special effects makeup look, while graphic, is achievable for beginners with patience and the right materials. By carefully building a latex prosthetic, blending it seamlessly with your skin, and using realistic blood and makeup techniques, you can create a truly impactful and memorable effect. Remember to prioritize safety, cleanliness, and responsible use of special effects makeup. Good luck, and have fun creating!
Nala Ray Of Leak
Jennifer Crawford
Josh Flagg Parents Net Worth Heritage And Wealth Examination The Untold Story Of'S Family Exploring His ' Legacy
DARK HUMOUR JOKES : 150 OF THE MOST DARKEST DARK HUMOUR JOKES "Dark
Dark Humor Happy Birthday Card | Boomf
Pin on Comics
